lowongan @ PT. BINA RASANO ENGINEERING

PT. BINA RASANO ENGINEERING

URGENT REQUIREMENT
Various Vacancies in Oil & Gas Company

We are a fast growing National Company, Contractor for Oil and Gas Industry (MIGAS projects) invite experiences and committed personnel for following positions:


1. PROJECT ENGINEER (MECHANICAL)

Qualification & Experiences

• Male, Minimum S-1 Degree in Mechanical Engineering from reputable university.
• Age 25-30 years old
• Minimum 5 years of Oil and Gas Industry experience.
• Experience in Geothermal Projects, Power Plat Industry.
• Must be very familiar and advance knowledge skills in mechanical, pumping, hydraulic calculation, piping design & construction as Project Engineer.
• Familiar and understand with Ms Office, Ms Project, API, ANSI, ASTM, ASME, Caesar & Fluid flow software, PFD and P&ID.
• Basic knowledge of safety & HES and Material & Welding Inspection.
• Fluent in English, written & spoken is a must.

2. CIVIL ENGINEER
Qualification & Experiences

• Minimum S-1 Degree in Civil Engineering from reputable university.
• Age 25 – 30 years old.
• Experience 2 years in Power Plant/ Geothermal and Project.
• Familiar and advance knowledge in Structural steel calculation, civil engineering design, and Project Management.
• Experience in general civil design (road, drainage, slope stabilization, hydro).
• Familiar with Ms Office, Ms. Project, STAAD PRO, SACS, SAP, AISC, ASTM, ANSI, ACI, and able to operate certain structural steel design Software.
• Applied knowledge and skill of Project Management, structural steel & construction, lifting, rigging and scaffolding (General Civil Projects).
• Fluent in English, written & spoken is a must.

3. ELECTRICAL ENGINEER
Qualification & Experiences

• Minimum S-1 Degree in Electrical Engineering from reputable university.
• Ages 25 – 30 years old.
• Experience min. 2 years in Power Plant/ Geothermal/ Petrochemical and others project.
• Applied knowledge and skill of high voltage power transmission & distribution design, selection and construction installation and installing electrical system protective device.
• Understanding single line diagram, PFD and P&ID.
• Basic knowledge of safety & environment (LOTO), permit system, lifting, rigging, scaffolding, fire protection, lighting protection system and instrument device and system.
• Familiar with Ms Office, Ms. Project, PIUL, NEMA, AISC, ASTM, ANSI, ACI, and able to operate certain structural steel design software.
• Applied knowledge and skill of project management, structural steel & construction, lifting, rigging and scaffolding (General Civil Projects).
• Design and installation of instrumentation system experience.
• 2 years in leading an instrument work project as project engineer.
• Fluent in English, written & spoken is a must.

4. GEOTECHICAL ENGINEER
Qualification & Experiences

• Minimum S-1 Degree in Geology / Geotechnical/ Civil Engineer from reputable university.
• Ages 25 – 30 years old.
• Experience in Power plant/ geothermal and project.
• Experience in soil engineering and geotechnical project as Project Engineer.
• Applied knowledge in soil and geotechnical engineering, investigation method and survey engineering.
• Applied knowledge and skill of lifting, rigging and scaffolding.
• Design / discipline engineer for soil engineering & geotechnical project for 4 years and project engineer for soil engineering & geotechnical project for 2 years.
• Familiar with Ms Office, Ms Project, Auto CAD, AISC, ASTM, ANSI, ACI.
• Fluent in English, written and spoken.

5. INSTRUMENT ENGINEER
Qualification & Experiences

• Minimum S-1 Degree in Electrical / Instrument / Physics Engineering from reputable university.
• Age 25 – 30 years old.
• Advance knowledge of instrument device and system (Flow, pressure, level, temperature, current, voltage sensor and control valve).
• 2 years in design, selection and installation of instrument system for process equipment/plant.
• Advance understanding of PFD and P&ID and applied knowledge of PLC, MMI and DCS.
• Capable to design instrumentation and protection system for process equipment or system.
• Familiar with ASME B31.3 and B31.3 codes, applicable API, ANSI, Ms Office, Ms Project.
• Basic knowledge of safety & environment (LOTO, permit system, lifting, scaffolding, fire protection, hydrocarbon management, etc.).
• Applied Project Management knowledge.
• 2 years in leading an instrument work project.
• 2 yeas in designing a control logic an MMI for process control.
• Basic knowledge of safety & environment.
• Fluent in English, written and spoken.

6. ROTATING EQUIPMENT ENGINEER
Qualification & Experiences

• Minimum S-1 Degree in Mechanical Engineering
• Knowledge in pumping, compressor, turbine, bearing, lubrication, gearing, power transmission system.
• Minimum 2 years of oil & gas or other industry experience in the same field.
• Familiar with international standard for vibration, basic theory of vibration, etc.
• Fluent in English, written and spoken is a must.

7. SAFETY ENGINEER & COORDINATOR
Qualification & Experiences

• Minimum S-1 Degree in Engineering or Health & Environment.
• Minimum 1-3 year as Safety Engineer
• Hold K-3 certificate, safety training certificate & familiar with international safety standard such as OSHA, NOSA, etc.
• Knowledge of chemical and hydrocarbon, fire fighting and fire protection method.
• Familiar with fabrication method, installation and construction method/strategy, lifting, and civil construction method.
• Familiar with Ms Office & basic knowledge of work permit, LOTO, JSA, Hazard analysis.
• Fluent in English, both written and spoken.

8. QA / QC ENGINEER
Qualification & Experiences

• Minimum S-1 Degree in Technical discipline from reputable university.
• Age 25 – 30 years old.
• Minimum 2 years experience as QA/QC engineer.
• Advance knowledge of mechanical and physical properties system for process equipment or system, welding process & NDT
• Familiar with ASME B31.3 and B31.3 codes, applicable API, ANSI, Ms Office, Ms Project.
• Basic knowledge of safety & environment, corrosion & other design drawings.
• Basic knowledge and skill of root cause analysis, process piping design.
• Fluent in English, written and spoken.

9. ENGINEERING TECHNICIAN / PLANT ENGINEERING (MECHANICAL)
Qualification & Experiences

• Minimum D-III in Mechanical Engineering from reputable university.
• Age 25 – 30 years old.
• 2 years in construction activity, 1 year as technician for piping system, general mechanical transmission.
• Applied knowledge of lifting, rigging, piping fabrication, installation, developing hazard analysis, job safety analysis.
• Knowledge of process piping design, material & machine elements, scaffolding.
• Familiar with API, ANSI, ASTM, ASME & safety and environment.
• Familiar and understand with Ms Office, Ms Project, able to interpret pump curve.
• Fluent in English, written and spoken.

10. CONTRUCTION ENGINEER and COORDINATOR
Qualification & Experiences

• S-1 in Engineering from reputable university.
• Age 25 – 30 years old.
• Minimum experience 2 years as Construction Planner / Coordinator and 3 years as Construction / Fabrication Supervisor.
• Knowledge in construction scheduling, estimating manpower, work permits system, LOTO, JSA, hazard analysis, earth moving and civil construction method.
• Experience in off-shore construction activities.
• 2 years as Construction Planner/ Coordinator.
• 3 years as Construction/ Fabrication supervision.
• Familiar with Ms Office, Ms Project.
• Fluent in English, both written and spoken.

11. CAPITAL PROJECT ENGINEER
Qualification & Experiences

• S-1 degree in Civil / Architect from reputable university.
• 7 Years experience
• Knowledge of civil engineering design and calculation, project management, engineering standard and codes, general civil project.
• Experience in structural steel & construction project.
• Understand K-3 or safety principles.
• Familiar with Ms. Office, Ms. Project, Auto CAD.
• Fluent in English, written and spoken.

If you believe that you find the requirement above, please send your Application Letter, CV/Resume, Recent Photograph, and Expected Salary Not more than 3 weeks after this advertisement shows by e-mail:

To : bre@binarasano.co.id and hrd@binarasano.co.id,
Cc : bambangsw@binarasano.co.id

By mail to:
“HRD DEPT”
PT. BINA RASANO ENGINEERING
Wijaya Graha Puri Blok A-6
Jl. Wijaya II, Kebayoran Baru
Jakarta Selatan 12160